EASYCAST® CLEAR Polyurethane Resin - 475gr

EASYCAST® CLEAR is an easy to use, low viscosity, water clear polyurethane resin. It is ideal  for resin jewellery and it can produce parts that are near bubble free without the use of vacuum degassing. Finished parts once cured properly are extremely durable. Care should be taken to use Platinum Based/Addition Cure Silicone for the moulds. Tin Cure Silicone will result in defective casts.

This resin has a work time of 9 minutes and a demoulding time of 30minutes. Remember, it is always best to allow your pieces to post-cure for at least 2-3 days sometimes longer in colder weather to ensure maximum strength. You can then file, finish, sand etc.  Always support the cast piece while post-curing.

Measure via Volume : A=100:B=100

Measure via Weight : A=100:B=90

It is always preferrable to use Weight measuring with Polyurethane - use digital scales for accuracy.